The main accessories of the pump station include the following:
Pipeline: Pipeline is one of the important accessories of the pump station. It is used to connect the pump and the equipment to be transported medium, and plays the role of transporting medium. The pipeline should be kept unobstructed to avoid excessive bending, wear and pollution to ensure the normal operation of the pump.
Valve: Valves are used to adjust the flow of the medium and prevent the backflow of the medium. Common valves include check valves, regulating valves, gate valves, etc. Appropriate selection and installation of valves can reduce system resistance, increase flow, and improve the working efficiency of the pump.
Inverter: The inverter can realize the speed control of the pump motor, which is convenient for the pump to change the operating state according to actual needs. By adjusting the motor speed, the inverter can realize the precise adjustment and intelligent control of the pump.
Water pump controller: It is used to control the coordinated operation of multiple water pumps. It has functions such as switch, automatic control, water level control, pressure control and protection, and effectively protects the safe and stable operation of the pump.
Sensor: It is used to monitor various parameters of the pump, such as pressure, flow, temperature, vibration, etc. The data collected by the sensor can be used to diagnose the pump status and faults, and timely discover and solve pump problems.
Safety valve and pressure relief valve: protect the safety of the system and the components and equipment in each part of the pipeline to prevent the system pressure from being too high.
Back pressure valve: keep the system pressure stable, prevent siphoning, and improve metering accuracy.
Pulse buffer: buffer pulses, absorb vibration energy, and make liquid delivery smooth.
Agitator: used for stirring, mixing, reaction and heat transfer.
Injection valve and check valve: one-way injection, anti-backflow, improve metering accuracy.
Bottom valve filter and Y-type filter: used to filter impurities and solid particles.
Flowmeter and liquid level meter: used to read the flow rate and liquid position height intuitively.
Sight glass: used to observe the liquid flow conditions in pipelines and containers.
Flow calibration tube: accurately calibrate the flow rate of the metering pump.
Diaphragm pressure gauge: used to measure and read the pressure of pipeline systems with highly corrosive liquids.